The I2C_Devicetree reference design project uses a programmable System-on-Chip (SoC) with a Cortex-M0 CPU, in a small 28 Pin TSSOP package, to emulate an I2C EEPROM using the FLASH memory of the SoC, which creates an "intelligent memory" device. The I2C_Devicetree reference design project is intended to make it easier for people to create their own custom expansion boards for Beaglebone, Raspberry Pi, FMC/IPMI, and other platforms that require the use of a I2C EEPROM for automatic product identification, pin mapping, and configuration.More Info »
A tailor or dressmaker is very familiar with the concept of a "pattern"; they select a pattern for the style of garment that they want to make, and then size the pattern for the customers individual measurements. This yields a repeatable garment, and gives the tailor or dressmaker all the instructions they require to fabricate it over and over.
PatternAgents applies that same concept to the field(s) of hardware, software and systems design. Take an "electric motor controller" for example; the concepts are the same for a tiny cooling fan motor controller, or a huge electric truck motor controller. Just like garments, electric motors come in a variety of "styles", such as brushed, brushless, permanent magnet, inductive, reluctance, stepper, servo, etc. By combining a "size" and a "style" for electric motor control, a reusable design pattern can be specified to give repeatable results for any electric motor controller application.
PatternAgents has developed formal methods for implementing reusable design patterns, sizing and styling them to meet our customers requirements. PatternAgents products are useful and saleable examples of the application of those formal methods, yielding products that are available off-the-shelf (for standard sizes and styles). PatternAgents can also quickly customize those "design patterns" for specific customer requirements.
thingSoC Specification Release
We just released the second draft specification (Version 0.2) for thingSoC : Open Source Sockets for the Internet of Things, and several new thingSoC reference designs.
thingSoC is an exciting new development from PatternAgents - an open source socket standard that enables you to quickly and easily build complex new IoT systems by plugging together components that can communicate setup and provisioning information with each other. thingSoC components can communicate about what components are plugged in, and how to access them. thingSoC defines a physical, hardware socket system for inter-operable printed circuit boards, with a data centric firmware model for automatic device discovery, and a software API for interacting with the system.
PatternAgents provides community and commerce for electronics designers, helping them to collaborate using shared patterns, practices, and resources; connect with others in the industry, conceptualize and create new ideas, commercialize their designs, and keep up on the latest technologies and concepts.Google+
- TSOC_PSoC4L : PSoC4 (Large) Embedded Module
- TSOC_NEOLED : LED Driver Embedded Module
- TSOC_Teensy3x : Teensy 3.2 thingSoC Adapter
- TSOC_GROVEY_I2CHUB : I2C Hub/Switch
- thingSoC nears release...
- Real-Time Location Systems for IoT
- New IoT SoCs
- More DeviceTree Flavors!
- Smart Device Trees meet Smart Objects
- Device Tree Discussions
- Smart Devicetrees
- Device Tree on Modbus
- Device Tree and Product Life Cycles
- Device Tree Overlays
- Device Tree Overview
- Sense and Sensor Abilities
- The BLOB - Binary Level OBjects
- Automatic Configuration Chains
- Small Form Factor Auto-Configuration
- MinnowBoard Lures Library
- Touch Widgets - Best Practices
- Touch Widgets How-To/Instructions
- Touch Widgets Library for Eagle
- Capacitance Sensing Introduction
- Building Your New Widget
- EagleCAD Libraries
- Quattrocycle Lighting Update
- Portland Mini-Maker Faire
- Arduino Y'un - The Next Generation